ALS’ Hydraulic Kick-Over Knuckle Joint has been designed to provide a method of deflecting Coiled Tubing Bottom Hole Assembly from the straight line of the tool string.
The tool is activated by increasing the pump rate through the Coiled Tubing. This activates a piston within the tool and a kick-over of 12° is achieved.
The Hydraulic Kick-Over Knuckle Joint has many useful applications. It provides a standard BHA with flexibility which can assist in passing through wellbore restrictions. Additionally, in conjunction with ALS’ Indexing Tools, lateral sections of a wellbore may be found and entered. This combination of tools is also useful in locating fish in larger diameter wellbores. Pressure integrity and a large Through-Bore are features of this tool which also allow off-centre jetting operations to be performed. They also ensure the safe passage of drop-balls and treatment fluid.
- Pressure Integrity
- 12° Angle of Deflection
- Hydraulically Operated
- Torque-Through Capability
- Large Bore-Through to Enable Passage of Drop-Balls
- May be Repeatedly Operated as Required During Deployment
|Tool OD||Tensile Yield||Torsional Yield||Pressure Rating||Deflection Angle||Standard Connections|
|Ø1-5/8"||35,000 lbs||400 ft-lbs||5,000 psi||12°||1.000" AMMT|
|Ø1-1/16"||39,250 lbs||490 ft-lbs||5,000 psi||12°||1.000" AMMT|
|Ø2-1/8"||68,575 lbs||1,200 ft-lbs||5,000 psi||12°||1-½" AMMT|
|Ø2-½"||90,000 lbs||1,500 ft-lbs||5,000 psi||12°||1-½" AMMT|
|Ø2-7/8"||109,750 lbs||2,100 ft-lbs||5,000 psi||12°||2-3/8" PAC DSI|
|Ø3-1/8"||128,600 lbs||2,400 ft-lbs||5,000 psi||12°||2-3/8" PAC DSI|
- Other sizes and connections available on request
- Standard and H2S service versions available
- Yield values shown are for standard service tools