The Quick Test Sub (QTS) is designed to save rig time while pressure testing the Wireline or Coiled Tubing pressure control equipment string when multiple runs are required.
The Quick Test Sub is inserted either above or below the Wireline/ Coiled Tubing valve at the position of the joint normally opened to insert and retrieve tools from the well. After performing the first pressure test to check the integrity of the whole string, subsequent pressure tests can be made using the Quick Test Sub verify the integrity of the tool joint disconnected, rather than having to test the whole assembly.
This is achieved by connecting a small hydraulic hand pump to the Quick Test Sub and testing the joint O-Ring seal exteriorly. It is estimated that the Quick Test Sub can reduce the time needed to pressure test the string at each subsequent test by more than half an hour!
|Maximum OD||13.28||337 mm|
|Inside Diameter||4.00"||101 mm|
|Make-up Length||28"||71.1 cm|
|Weight||370 lbs||168 kgs|
|Working Pressure||10,000 psi||10,000 psi|
|Test Pressure||15,000 psi||15,000 psi|
|Connections||8.25" - 4 x 2 (6.000") BOWEN||8.25" - 4 x 2 (6.000") BOWEN|
|Service||H2S / STD||H2S / STD|