The Free-Rotating Swivel Joint allows the full rotation of Bottom Hole Assembly components placed under the joint.
The tool has pressure integrity and rotation is possible under load.
The Swivel Joint is used when full and free rotation of the tool string is required down-hole. A Swivel Joint typically is required to assist passage through down-hole restrictions or where orientation is necessary, such as in the manipulation of Gas Lift Mandrels.
The Swivel Joint can also be used while making up the BHA at surface. Bottom Hole Assembly components beneath the Swivel may be rotationally locked, and the Swivel is used to connect this assembly to the upper BHA.
The large Through-Bore ensures a minimal pressure differential is created across the tool and allows for the passage of drop-balls.
- Pressure Integrity
- Flow-Through Capability
- Operates Under Tensile & Compressive Loading
- Available in a Variety of ODs & With Industry-Standard Connections
|Tool OD||Tensile Yield||Torsional Yield||Max Tubing/Casing Size||Rotational Increment|
|Ø1-½"||31,000 lbs||365 ft-lbs||5,000 psi||1.000" AMMT|
|Ø1-½"||31,000 lbs||365 ft-lbs||5,000 psi||1-1⁄8" – 10 TPI SA|
|Ø1-11/16"||39,000 lbs||500 ft-lbs||5,000 psi||1.000" AMMT|
|Ø2-1/8"||80,000 lbs||365 ft-lbs||5,000 psi||1-½" AMMT|
|Ø2-¼"||78,750 lbs||1,400 ft-lbs||5,000 psi||1-½" AMMT|
|Ø2-7/8"||140,000 lbs||1,000 ft-lbs||5,000 psi||2-3⁄8" PAC Dsi|
|Ø3-1/8"||177,500 lbs||3,740 ft-lbs||5,000 psi||2-3⁄8" PAC Dsi|
- Other sizes and connections available on request
- Standard and H2S service versions available
- Yield values shown are for standard service tools
- Lockable swivel joints also available