Dé el siguiente paso.

Solicite un presupuesto para nuestros servicios de toma de muestras y análisis con garantía de calidad y nos pondremos en contacto con usted en un plazo de dos días hábiles.

Póngase en contacto con nosotros.

¿Tiene preguntas o comentarios sobre nuestros servicios de calidad del agua? Envíenos un mensaje y nos pondremos en contacto con usted lo antes posible.


Small pilot-scale coal preparation

ALS operates two pilot-scale coal preparation plants. The larger plant processes raw coal samples of between 1.4 to 20 tonnes. This plants accurately simulate a broad range of full-scale coal preparation plant processes. It has significant value in that it can evaluate the washability behavior of a coal and produce washed products in a way that is closely aligned with the product that might be achieved from an operating mine.

The pilot-scale coal preparation plants are employed to achieve three main goals:

  • To supplement bore-core programs to provide sufficient information for the design of a full-scale coal preparation plant
  • To provide "end-products" which undergo comprehensive testing to provide a clear understanding of the utilization potential of the coal as a thermal or coking coal. The product may also be shipped to various potential end-users to allow these parties to understand the nature of the coal as it would be produced from an operating mine.
  • To provide processing stream samples to assist with the full-scale coal preparation plant design. Individual plant streams can be collected, analyzed, and provided to processing equipment suppliers to evaluate their equipment performance. The reject materials are also collected from the plant and can be dispatched for environmental testing and other testing associated with disposal of rejects.

Process overview

The small pilot-scale coal preparation plant does not wash all fractions concurrently. The coarse, fine and ultra-fine coal fractions are processed individually through stand-alone circuits. This has allowed ALS greater control of the sample processing stages. These stages are outlined below.

Laboratory support

If there is limited coal washability information on the plant feed, ALS Coal is able to collect a sample to conduct a full washability analysis which can be used to identify the target densities to meet yield and target ash values. Each of the pilot plant products are typically dried, weighed and subsampled for ash percent. This provides guidance on the product ash and yield. A simulated overall plant product can be targeted by proportional blending of the product streams. Comprehensive coal characterization is provided on simulated product by sub-sampling the products and rejects and processing the coal through ALS' extensive laboratory network

Related Topics

Preparación de carbón de báscula piloto grande

Para muestras más grandes, ALS proporciona una planta de preparación de carbón de báscula piloto con la capacidad de procesar entre 1,5 y 20 toneladas de carbón.